Blog :: Mezintel Inc. - Measurements Intelligence » MWD – Gamma Logging https://www.mezintel.com/blog Mon, 26 May 2025 17:05:38 +0000 en-US hourly 1 http://wordpress.org/?v=3.5.2 LWD Log Headers – 3 Styles to Suit Your Requirements https://www.mezintel.com/blog/lwd-log-header-styles-as-required/ https://www.mezintel.com/blog/lwd-log-header-styles-as-required/#comments Sun, 29 Mar 2020 05:43:42 +0000 Mezintel http://www.mezintel.com/blog/?p=3004 Mezintel Gamma features three LWD log header styles with variation in format, bit run holding capacity, and content (e.g. emphasis on either casings info or mud properties). A brief summary of these three headers is as follows: 1. Standard Header The standard header is a brief, suitable for short jobs with a maximum of six [...]

The post LWD Log Headers – 3 Styles to Suit Your Requirements appeared first on Blog :: Mezintel Inc. - Measurements Intelligence.

]]> https://www.mezintel.com/blog/lwd-log-header-styles-as-required/feed/ 0 MWD Communication via Ethernet or Serial Port https://www.mezintel.com/blog/mwd-logging-via-ethernet-or-serial-port/ https://www.mezintel.com/blog/mwd-logging-via-ethernet-or-serial-port/#comments Fri, 09 Aug 2019 19:00:03 +0000 Mezintel http://www.mezintel.com/blog/?p=2909 You can connect Mezintel Gamma to EDR depth tracking systems or MWD decoding systems via two modes: Serial Port (i.e. COM Port Number & Baud Rate) Ethernet (i.e. IP Address and Telnet Port Number) These two methods are made available to guarantee that a PC running Mezintel Gamma LWD/MWD software (version 22.15.127 onwards), can connect [...]

The post MWD Communication via Ethernet or Serial Port appeared first on Blog :: Mezintel Inc. - Measurements Intelligence.

]]> https://www.mezintel.com/blog/mwd-logging-via-ethernet-or-serial-port/feed/ 0 Deriving Conductivity from Resistivity In Mezintel Gamma https://www.mezintel.com/blog/deriving-conductivity-resistivity/ https://www.mezintel.com/blog/deriving-conductivity-resistivity/#comments Sun, 04 Aug 2019 12:46:28 +0000 Mezintel http://www.mezintel.com/blog/?p=2840 The screenshot below shows how to setup this feature in Mezintel Gamma (as of version 22.87.128). Note that if you want to get just one Conductivity channel you will just fill in: GV4,1000 The first entry is the channel ‘Tag name’ from which conductivity will be derived from, and the second number is the multiplier. [...]

The post Deriving Conductivity from Resistivity In Mezintel Gamma appeared first on Blog :: Mezintel Inc. - Measurements Intelligence.

]]> https://www.mezintel.com/blog/deriving-conductivity-resistivity/feed/ 0 UPDATE: IFR Surveys Correction for MWD https://www.mezintel.com/blog/ifr-surveys-improved/ https://www.mezintel.com/blog/ifr-surveys-improved/#comments Thu, 06 Jun 2019 23:26:56 +0000 Mezintel http://www.mezintel.com/blog/?p=2790 Recommended: First read a brief background and the benefits of handling IFR surveys in Mezintel Gamma. Exporting surveys for IFR correction is now even simpler in Mezintel Gamma. As of version 22.20.129, an IFR Express Export feature combines 3 steps of the export process into one: Mark survey row as MWD survey Duplicate the MWD [...]

The post UPDATE: IFR Surveys Correction for MWD appeared first on Blog :: Mezintel Inc. - Measurements Intelligence.

]]> https://www.mezintel.com/blog/ifr-surveys-improved/feed/ 0 Switching Between MWD Tags and WITS for Communication https://www.mezintel.com/blog/switching-data-mwd-tags-wits/ https://www.mezintel.com/blog/switching-data-mwd-tags-wits/#comments Sun, 10 Mar 2019 13:31:14 +0000 Mezintel http://www.mezintel.com/blog/?p=2756 The job templates in Mezintel Gamma software are preconfigured to understand appropriate data formats for each MWD platform / system. So for example, if you choose the XXT Template then your job will only understand incoming MWD data in the form Tag data (i.e. qTalk): Gamma = Value This configuration is correct if your Mezintel [...]

The post Switching Between MWD Tags and WITS for Communication appeared first on Blog :: Mezintel Inc. - Measurements Intelligence.

]]> https://www.mezintel.com/blog/switching-data-mwd-tags-wits/feed/ 0 IFR Surveys Correction for MWD https://www.mezintel.com/blog/ifr-surveys/ https://www.mezintel.com/blog/ifr-surveys/#comments Thu, 20 Dec 2018 17:20:38 +0000 Mezintel http://www.mezintel.com/blog/?p=2629 Processing Surveys for IFR Corrections. Specialized third-party companies perform the actual IFR correction, while Mezintel Gamma recognizes and records the corrected surveys to produce appropriate reports. In handling IFR requirements in Mezintel Gamma, you can… Export a selection of surveys for IFR correction. (See instructions below) Manage both MWD surveys and their IFR-corrected equivalents. Switch [...]

The post IFR Surveys Correction for MWD appeared first on Blog :: Mezintel Inc. - Measurements Intelligence.

]]> https://www.mezintel.com/blog/ifr-surveys/feed/ 0 Finding ‘Check Survey’ Spots https://www.mezintel.com/blog/finding-check-surveys/ https://www.mezintel.com/blog/finding-check-surveys/#comments Fri, 19 Oct 2018 17:15:53 +0000 Mezintel http://www.mezintel.com/blog/?p=2573 MWD operators often need to match surveys to particular points in a run. A common example of this is during ‘check survey’, which is recommended to be done near the last MWD survey on the previous run. For check survey, finding the last survey on the previous run is fairly straightforward since that survey is [...]

The post Finding ‘Check Survey’ Spots appeared first on Blog :: Mezintel Inc. - Measurements Intelligence.

]]> https://www.mezintel.com/blog/finding-check-surveys/feed/ 0 New Tools and Features For ECD Calculation https://www.mezintel.com/blog/new-tools-features-ecd-calculation/ https://www.mezintel.com/blog/new-tools-features-ecd-calculation/#comments Mon, 02 Oct 2017 16:10:41 +0000 Mezintel http://www.mezintel.com/blog/?p=2295 Mezintel Gamma has new tools and features for ECD Calculation! Illustrated below, are the new features and tools to help you get the job done: Tool to Hand Bomb Values into the Software This new tool will allow you to generate the exact values that you need to show in the Mezintel Gamma program. This [...]

The post New Tools and Features For ECD Calculation appeared first on Blog :: Mezintel Inc. - Measurements Intelligence.

]]> https://www.mezintel.com/blog/new-tools-features-ecd-calculation/feed/ 0 How to Annotate Charts in Mezintel Gamma https://www.mezintel.com/blog/annotate-charts-mezintel-gamma/ https://www.mezintel.com/blog/annotate-charts-mezintel-gamma/#comments Fri, 22 Sep 2017 04:24:02 +0000 Mezintel http://www.mezintel.com/blog/?p=2272 There are two ways to annotate charts in Mezintel Gamma. 1. You can enter comments in EDIT PLOT window 2. You can also add a comment by right clicking on the log itself while under print preview.

The post How to Annotate Charts in Mezintel Gamma appeared first on Blog :: Mezintel Inc. - Measurements Intelligence.

]]> https://www.mezintel.com/blog/annotate-charts-mezintel-gamma/feed/ 0