Blog :: Mezintel Inc. - Measurements Intelligence » tip

MWD Communication via Ethernet or Serial Port

Mezintel — Fri, 09 Aug 2019 19:00:03 +0000

You can connect Mezintel Gamma to EDR depth tracking systems or MWD decoding systems via two modes: Serial Port (i.e. COM Port Number & Baud Rate) Ethernet (i.e. IP Address and Telnet Port Number) These two methods are made available to guarantee that a PC running Mezintel Gamma LWD/MWD software (version 22.15.127 onwards), can connect [...]

The post MWD Communication via Ethernet or Serial Port appeared first on Blog :: Mezintel Inc. - Measurements Intelligence.

Deriving Conductivity from Resistivity In Mezintel Gamma

Mezintel — Sun, 04 Aug 2019 12:46:28 +0000

The screenshot below shows how to setup this feature in Mezintel Gamma (as of version 22.87.128). Note that if you want to get just one Conductivity channel you will just fill in: GV4,1000 The first entry is the channel ‘Tag name’ from which conductivity will be derived from, and the second number is the multiplier. [...]

The post Deriving Conductivity from Resistivity In Mezintel Gamma appeared first on Blog :: Mezintel Inc. - Measurements Intelligence.

UPDATE: IFR Surveys Correction for MWD

Mezintel — Thu, 06 Jun 2019 23:26:56 +0000

Recommended: First read a brief background and the benefits of handling IFR surveys in Mezintel Gamma. Exporting surveys for IFR correction is now even simpler in Mezintel Gamma. As of version 22.20.129, an IFR Express Export feature combines 3 steps of the export process into one: Mark survey row as MWD survey Duplicate the MWD [...]

The post UPDATE: IFR Surveys Correction for MWD appeared first on Blog :: Mezintel Inc. - Measurements Intelligence.

Finding ‘Check Survey’ Spots

Mezintel — Fri, 19 Oct 2018 17:15:53 +0000

MWD operators often need to match surveys to particular points in a run. A common example of this is during ‘check survey’, which is recommended to be done near the last MWD survey on the previous run. For check survey, finding the last survey on the previous run is fairly straightforward since that survey is [...]

The post Finding ‘Check Survey’ Spots appeared first on Blog :: Mezintel Inc. - Measurements Intelligence.

Getting E-Signature File Into BreakTest

Mezintel — Wed, 25 Oct 2017 12:42:37 +0000

About E-Signatures An E-Signature stands for: Electronic Signature, and it is an image file of one’s signature that shows up on BreakTest reports after clicking the ‘Reviewed By’ check box. A user must have signatory rights for the ‘Reviewed by’ check box to appear. An example of an electronic signature is the one shown below [...]

The post Getting E-Signature File Into BreakTest appeared first on Blog :: Mezintel Inc. - Measurements Intelligence.

How to Annotate Charts in Mezintel Gamma

Mezintel — Fri, 22 Sep 2017 04:24:02 +0000

There are two ways to annotate charts in Mezintel Gamma. 1. You can enter comments in EDIT PLOT window 2. You can also add a comment by right clicking on the log itself while under print preview.

The post How to Annotate Charts in Mezintel Gamma appeared first on Blog :: Mezintel Inc. - Measurements Intelligence.

Building Mezintel Gamma Log With Default Minor And Major Increments

Mezintel — Wed, 20 Sep 2017 16:43:10 +0000

With Mezintel Gamma version 22.33.128, users have access to a utility for auto printing reports that enables the input of default minor and major increments. Please note that minor and major increments must be inputted and saved with each new job. The below figure demonstrates utilization of this utility to input default minor and major [...]

The post Building Mezintel Gamma Log With Default Minor And Major Increments appeared first on Blog :: Mezintel Inc. - Measurements Intelligence.

WITS Simulator for Drilling Depth Data

Mezintel — Fri, 21 Jul 2017 22:39:15 +0000

Often MWD operators and tool engineers need to simulate WITS data for depth. Depth simulation may be needed for training or shop testing where a depth tracking system (DTS) is not available, or for troubleshooting communication with a present DTS or EDR. Mezintel Gamma software offers in-app simulation for both MWD and depth data, and [...]

The post WITS Simulator for Drilling Depth Data appeared first on Blog :: Mezintel Inc. - Measurements Intelligence.

Printing a Select Set of Test Rows

Mezintel — Tue, 16 Aug 2016 23:24:34 +0000

Once the reviewer approves test results in BreakTest, signing the test reports automatically archives them as PDF files. These PDF reports are snapshots of the e-form as it was when it was signed, and are ready to be emailed to the client. For field density tests however, there may be times when you are required [...]

The post Printing a Select Set of Test Rows appeared first on Blog :: Mezintel Inc. - Measurements Intelligence.